Total weight: approx. 5 300 kg
Max. reach: 6 000 mm
Driving speed crawler: 2.9 km/h
Rotation speed: 0 - 2.8 min-1
Power: 55 kW
Electric drive (alternative)
Power: 37 kW
Articulated boom: 3-stage or
Telescopic rotary boom: 2 000 mm stroke
Rotation: 360° continuous
Rotation speed: 0 - 5 min-1
Pump pressure: 250 bar
Driver's cab: –
Remote controls: Standard
More about the electric arc furnace
Tunnel and gallery construction
More about tunnel construction
Demolition and construction industry
Ripper hooks are suitable for all areas where a targeted use of force concentrated on one tooth is required.
Use in the metallurgy
The ripper hook is used for breaking out and cleaning ladles, electric furnaces and converters directly in the extreme hot temperatures up to 1,400°C.
The ripper hook is used for scaling and tearing rock and stone. The tool has a replaceable wear tip made of special material.
The porous plug pusher is an attachment tool and is fastened directly to the ripper hook. It is used to push out the purging plug in ladles when hot. The pusher has a replaceable point made of special material suitable for the hot area.
The tap hole drill is attached directly to the ripper hook by means of 2 pins and is used to drill out the worn tap hole sleeve on converters, precisely and in a short time. The replaceable drill heads are equipped with hard-faced wear blades and can be easily and quickly attached to the drill rod.
Use in the metallurgy
The ripper bucket is used for cleaning blast furnace channels, excavating materials in electric arc furnaces and cleaning the pits under the BOF vessels.
Hydraulic hammers are used for breaking refractory materials and linings in e.g. converters, ladles, electric furnaces and blast furnace runners in mainly colder condition.
Use in mining/tunnelling/demolition
Use for scaling in underground mining operations and for breaking out material when enlarging tunnel cross-sections, tunnel rehabilitation and the construction of caverns and cross-cuts.
The hydraulically operated drum cutters are used to remove refractory material in blast furnace runners and to profile monolithic refractories.
Use in mining/tunnelling/demolition/construction industry
Used for underground mining work as well as for cutting out material when enlarging tunnel cross-sections, tunnel renovation and the construction of caverns and cross-cuts.
The cutter is equipped with wear-resistant, replaceable cutter teeth.
Application cunstruction industry:
Buckets pick up loosened or loose material, they are suitable for excavation work at depth, e.g. for pits or trenches, available in various sizes with or without teeth.
Here are contents that indicate the available options.
The protection of your data is important for us.
Click on "Activate" to allow us requesting google servers to show Google Maps.